Promaker PRO-TP500 Manual Del Usuario página 11

break and possibly cause serious
injury.
DRILL / HAMMER SWITCH
Fig.6a
INSTALLING
HANDLE
Install the auxiliary handle (1) for
two handed operation of the drill
(Fig. 7). This is particularly important
for hammer drilling in concrete.
1. Rotate the auxiliary handle
counter clockwise to open the
mounting collar (2).
Fig. 6b
THE AUXILIARY
Fig.7
2. Slide the auxiliary handle collar
over the chuck and fully onto the drill
housing (3).
3. Rotate the auxiliary handle to a
comfortable position.
4. Rotate the auxiliary handle
clockwise to tighten the mounting
collar onto the drill housing.
NOTE: Do not over tighten the
auxiliary handle or you will break the
mounting collar.
INSTALLING THE DEPTH ROD
The depth rod is used as a gauge to
control the depth of the drilled hole.
1. Turn the assist handle (1) counter
clockwise to open the mounting
collar (2) (Fig. 8).
2. Insert the hexagon depth rod (3)
into the matching hole in the assist
Fig.8
11