KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Oil Fill Cap and Dipstick
Gas Cap
Nozzle Extension
Adjustable Nozzle
Adjustable Nozzle – Always attached to nozzle
extension. Adjust for high or low pressure; narrow or
fan spray.
Air Filter – Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Detergent Pick–Up Tube and Filter – Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Gas Cap – Fill fuel tank with regular unleaded
gasoline here.
High Pressure Hose – Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet – Connection for high pressure
hose.
Nozzle Extension - Attach to spray gun to use
adjustable nozzle.
OPERATION
High Pressure Hose
Spray Gun
Water Inlet
Pump
Oil Fill Cap and Dipstick – Check and fill engine with
oil here. See page 4 for oil recommendations and
filling instructions.
Primer Bulb - Used to help start a cold engine.
Pump – Develops high water pressure.
Recoil Starter – Used for starting the engine.
Spray Gun – Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Throttle/Choke Control Lever – Sets engine in
starting mode for recoil starter and stops running
engine.
Water Inlet – Connection for garden hose.
6
Detergent Pick–Up
Tube and Filter
Recoil Starter
Air Filter
Throttle/Choke
Control Lever
Primer Bulb
High Pressure Outlet