EN
AR 5N (ADDITIONAL CONFIGURATION)
AR 5N
AR 5N (NOTES)
NOTES:
LAN connection
1. If the LAN has DHCP, it will assign a valid IP address in the correct range to all devices present in the
LAN (AR 5N (one o more), Digiline and computer).
2. If the LAN has not DHCP, the connection between is possible inside IP range 169.254.x.x. This range is
defined inside IP protocole as link local. Therefore, all device inside this range will have not problem
connecting between them
Additional note: The most common scenary is the point 1, a LAN with DHCP which assign IP to all devices
Configuration
1. To switch off the AR 5N, select "None" in the "Link with device" window.
Notes
1. It is possible to connect several AR 5N devices to the same LM5.
2. At startup the AR 5N only updates the SHOW status.
3. Every 5 seconds the AR 5N updates the SHOW and Master Status.
Quick Guide
Right-click in the mouse over the AR 5N inside PROJECT
INSPECTOR, allows to change several features of the device
as:
- To rename
- To delete the device of the PROJECT INSPECTOR
- To change the static Ip address or the Subnet
- To reset the device
- 5 -
AR 5N
www.work.es