Graco Direct Connect 2M17 Manual Del Dueño página 6

and you can speak.
Talk feature is active.
NOTE: When activating the Talk feature from the Parent Unit, transmission from the
child unit to the parent unit is temporarily disabled.
Nursery Unit and fully charged in Parent Unit)
adapter.
connections.
obstruction.
repositioning Nursery Unit.
eliminate cause of static (TVs, mixers, computers,
fans, fluorescent lights, light dimmers, etc.)
them closer.
Parent Unit and Nursery Unit such as walls,
ceilings & buildings.
Try moving the Nursery Unit to another part of
the room.
Talk Feature
To ensure privacy, your Parent Unit is paired with
will not work with any other Nursery Unit.
If Parent Unit won't lock onto the Nursery Unit,
or you purchased a new Nursery Unit, follow the
procedure below to pair the Parent Unit and
Nursery Unit. If you purchased a new Parent Unit,
skip Step 1. The new Parent Unit is ready to pair
with your Nursery Unit.
1. Erase the Pairing from the Parent Unit.
a single beep and the sound light will illuminate
briefly.
display will show two
showing. The Parent Unit is ready to pair with
Nursery Unit.
2. Pair the Parent Unit with Nursery Unit.
(1.5 meters) away from the Parent Unit.
the side. The green power light should come on.
the Nursery Unit. The sound light will shut off and
the Parent Unit will beep. The Parent Unit is now
paired with Nursery Unit.
3. Repeat this procedure if you need to pair
another Parent Unit with the Nursery Unit.
Nothing happened when I turned on the
Nursery Unit. What do I do?
again.
If the Parent Unit still does not pair with the
Nursery Unit, then turn the Nursery Unit off, and
then on again.
6
--
and the will be