Instructions (Using Smart-Lct); Additional Troubleshooting - Chauvet Professional NOVASTAR VIP Drive Nova/VD43 Guía De Solución De Problemas

Novastar Troubleshooting Guide
23. The following window will open to select which panels to send the configuration to:
24. Press Send when ready. This is a fast send option, which will temporarily configure the video panel. Before
sending, check that the file is the correct one.
25. To make this configuration final, press Save.

Instructions (using Smart-LCT):

1. Open the Nova LCT-Mars software.
2. Confirm that the sender/VD43 is connected.
3. If the control system shows "0", then select System>Reconnect to connect to the server.
Good Practices
It is always advisable to read from receiver card and save to a file on the local machine before sending a new
configuration to the video panel.

Additional Troubleshooting

The ability to remotely check connection from the video wall controller to the video panels is available directly through the
Nova LCT-Mars software on PC. Follow the steps below to check the parameters.
Instructions
1. Open the Nova LCT-Mars software.
2. Confirm that the sender/VD43 is connected.
Revision 1
CHAUVET VIDEO PRODUCTS
Do not turn off power until process is completed.
EN
7