Using The Memory Function - Walgreens WGNBPA-550 Manual Del Usuario

USING THE MEMORY FUNCTION

This monitor can be used by 3 users. Each user
can store up to 80 measurements.
This monitor features an advanced memory
mode to provide you with a variety of options for
reviewing your measurement history, including
AM/PM Averaging. Reviewing your morning (AM)
and nighttime (PM) blood pressures can provide
important information about how your blood
pressure changes throughout the day.
Displays average of last three
AVG. 3
readings.
Allows user to toggle through
all readings stored in memory,
REVIEW
beginning with the most recent.
Displays average of last 3 morning
readings
AVG. 3 AM
(AM is defined as
4:00 AM – 12:00 PM).
Displays average of last 3 nighttime
readings
AVG. 3 PM
(PM is defined as
6:00 PM – 2:00 AM).
WGNBPA-550.indd 27-28 WGNBPA-550.indd 27-28
25
To choose the memory information
to be displayed:
1. Press and hold the "M" button for 3
seconds. Release the button when
the "MEMORY SELECT" box begins
flashing on the display.
2. Toggle through memory mode
options by pressing the "M" button
again. Each new press and release
of the button will display a new
memory mode as shown to the right.
3. Once the desired memory mode
appears inside the "MEMORY
SELECT" box on the display:
• Do not press any buttons for five
seconds and the mode will be
confirmed.
• You may also press the "START/
STOP" button to confirm the
mode selection
4. Once a selection is confirmed, the
monitor will remain in the selected
mode until it is changed.
Press
"M"
Press
"M"
Press
"M"
Press
"M"
26
11/9/09 1:57 PM 11/9/09 1:57 PM