Troubleshooting - Klarstein Future Chef Manual Del Usuario

TROUBLESHOOTING

Possible cause
Error code
No pot or Pot too small,
material/ position not
E0
right
Too low voltage
E1
protection.
High voltage protection.
E2
Temperature sensor open
E3
circuit or short circuit
IGBT sensor open or short
E4
circuit
Temperature sensor
E5
overheat protection
IGBT overheat
E6
Thermocouple
(temperature sensor)
E7
invalidation protection
Communication fault
E9
Note: If the faults cannot be resolved, please do not disassemble the appliance
by yourself, but return it to the service centre for repairing. If you disassemble the
appliance by yourself, we have the right to make the warranty invalid. Dangers or
other safety accidents caused by this will also be charge to the user.
Solutions
Put the suitable pot on the
surface of the cooker.
Please ensure 80 V <
270 V, 220 V~240 V is
preferred.
Please ensure 80 V <
270 V, 220 V~240 V is
preferred.
Please return the cooker
to the service centre for
checking and repairing.
Please return the cooker
to the service centre for
checking and repairing.
Start again after the
temperature cool down
Please check if the air
intake and outlet is
jammed. If not, please
return the cooker to the
service center for checking
and repairing.
Please return the cooker
to the service center for
checking and repairing.
Power on again.
EN
27