Taurus F40 TURBOCYCLONE 2000 Manual De Instrucciones página 15

- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not submerge the appliance in water or any other
liquid, or place it under a running tap.
Emptying the dust box:
- Empty the vacuum deposit when dust is visible though
the transparent walls, when it is full, or when the va-
cuum cleaner does not work to its full potential.
- In all cases, empty the deposit when the deposit full
indicator shows completely red.
- Disconnect the hose from the vacuum cleaner's air
intake. (Fig 1)
- Disconnect the dust box from the appliance. (Fig. 3)
- Open the lid of the dust box and empty the contents into
the appropriate waste disposal receptacle.
- Close the lid of the dust box.
- Attach the dust box to the appliance.
- Connect the hose to the vacuum cleaner's air intake.
Changing the filters:
- Motor filter, it is advisable to be changed at least once a
year or every 100 hours of the appliance's use.
- HEPA air vent filter (High efficiency air filter that
efficiently retains spores, ash, sawdust, pollen...), it is
advisable to change it a least once a year or after every
100 hours of use.
- To remove filters:
Motor filter:
- Disconnect the dust box from the appliance. (Fig. 3)
- The filter motor can be found in the motor's turbine air
entrance.
- Turn the external cyclonic filter in a clockwise direction
and remove the filter.
- Repeat this operation with the internal conical filter.
(Fig 4)
- Remove the filter from its housing. (Fig. 5)
- To reassemble the filter, proceed with the above ins-
tructions, in reverse order.
Outlet filter
- Open the cover of the filter housing at the top part of
the vacuum cleaner. (Fig 6).
- Remove the filter from its housing.
- Change the filter.
- To reassemble the filter, proceed with the above ins-
tructions, in reverse order.
Supplies
- Supplies can be acquired from distributors and au-
thorised establishments (such as filters, etc. ) for your
appliance model.
- Always use original supplies, designed specifically for
your appliance model.
Anomalies and repair
- Take the appliance to an authorised technical support
service if problems arise. Do not try to dismantle or
repair without assistance, as this may be dangerous.
Manual F40.indb 15
- If the connection to the mains has been damaged, it
must be replaced and you should proceed as you would
in the case of damage.
For EU product versions and/or in case that it is reques-
ted in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance
consists are included in a collection, classification and
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
The product does not contain concentrations of substan-
ces that could be considered harmful to the environment
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of waste electrical and
electronic equipment (WEEE)
This appliance complies with Directive 2006/95/EC on
Low Voltage and Directive 2004/108/EC on Electromag-
netic Compatibility.
19/12/12 10:40