Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
personal injury, or property damage if ignored.
ELECTRIC SHOCK HAZARD
Prior to beginning any water treatment regimen, always consult with a water
treatment professional and adhere to the information contained in the chemical
manufacturer's Material Safety Data Sheet.
plug. To reduce risk of electrical shock, connect only to a properly grounded,
grounding type receptacle. Install only on a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI).
DO NOT alter the power cord or plug end.
DO NOT use receptacle adapters.
DO NOT use PCM with a damaged or altered power cord or plug. Contact the factory
for repair.
DISCONNECT power cord before removing cover for service. Electrical service by
trained personnel only.
This equipment IS NOT explosion proof. DO NOT install or operate in an
explosive environment.
DO NOT install or operate on any flammable surface.
injury or property damage if ignored.
Modules must be determined through analytical testing of the treated water. The formulas
contained herein are intended solely as a guide to be used to assist in the proper
application of Stenner Pumps. The Stenner Pump Company makes no guarantee as to the
accuracy of the information contained herein. User assumes all risk and liability from use
of the information contained in this manual.
4
Warns about hazards that CAN cause death, serious
This information contained in this manual is for reference only.
Equipment is supplied with grounding power cord and attached
HAZARDOUS VOLTAGE
EXPLOSION HAZARD
RISK OF FIRE HAZARD
Warns about hazards that WILL or CAN cause minor personal
Final settings on Stenner Metering Pumps or Pump Control
www.stenner.com
Capítulos
Tabla de contenido
