Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
The CST remote control must be handled with care. Do not
drop it or expose it to direct sunlight or sources of heat. It is
advisable to keep the CST remote control placed on a table
or a flat surface.
Do not hold the CST remote control in your hand for long
time to avoid altering the reading of the sensors.
•
The CST sensors are also disabled if the CST remote control
is positioned at a distance less than 3.3ft (1 m) from the
unit.
•
The CST remote control is equipped with touch sensitive
buttons.
•
The CST remote control is equipped with a double color built-
in LED (D10) (white/red). White indications are used for:
-
signaling the touching of each button with 3 fast flashes
-
every 30 seconds it blinks for data transmission
-
signaling the entering of pairing phase with periodic
blinking
-
signaling the batteries good status
•
The same indications but in red color mean that the batter-
ies begin to be exhausted.
Please note: The remote control can be safely stored in the ap-
propriate compartment (A11).
TURNING THE APPLIANCE ON/OFF
•
Plug into the outlet.
•
Touch the
ON/STAND-BY button (D1). When turned on,
the air conditioner starts operating in the same mode as
when it was turned off.
•
Touch the
ON/STAND-BY button (D1) again to switch the
appliance off.
Please note: Never switch the appliance off by removing the plug.
Always switch it off by touching the
and waiting few minutes before removing the plug. Only in this
way the appliance will perform the standard checkings.
SELECTING THE OPERATING MODES
The operating modes available on the CST remote control
through the MODE button (D2) correspond to those on the ap-
pliance control panel (C).
SELECTING THE TEMPERATURES
In conditioning mode touch button (D3) or (D4) to select
the desired temperature.
SELECTING THE AIR FLOW
In conditioning and fan modes, touch
the desired air flow.
The air flows available are:
Minimum air flow: when room has cooled
down and you want a quieter operation.
Medium air flow: when the noise level needs
to be low but with a good comfort level.
ON/STAND-BY button (D1)
button (D7) to select
Maximum air flow: for maximum perfor-
mance.
:
Auto
the appliance automatically chooses the
air flow based on the temperature selected and
the environmental conditions. This selection is
only available in conditioning mode.
ECO REAL FEEL FUNCTION
ECO REAL FEEL is the innovative De'Longhi technology that
works simultaneously on temperature reduction and humidity
control, securing best comfort level. With traditional systems,
during working time, optimal comfort conditions may be
reached but not secured over time. With ECO REAL FEEL, once
optimal comfort is reached, PAC automatically modulates com-
pressor action and air flow, to keep it over time which can save
up to 30% on energy usage.
To activate the function, touch the
control and the ECO REAL FEEL symbol appears.
The "ECO REAL FEEL" status indicator (C9) becomes white for approx.
1 min. to indicate that the appliance is checking the room conditions.
Afterwards the "ECO REAL FEEL" status indicator (C9) changes col-
our as it approaches comfort conditions (see following diagram).
For this type of use, the appliance must be set up as for air con-
ditioning mode.
HIGH
MEDIUM
LOW
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
BLUE LIGHT: Best comfort level.
Perfect!
9
button (D9) on remote
Operating curve
Perfect!
TEMPERATURE
Tabla de contenido
Solución de problemas
