Tabla de contenido
Idiomas disponibles
Idiomas disponibles
R
C
O
EMOTE
ONTROL
PERATION
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers' components, using the
component function buttons for VCR, DVD, DBS, RCVR or
AUX. Follow the procedures for programming your Remote
Control with or without a code for the component.
Device
Operates
TV
TV (Panasonic Only)
VCR
VCR (Preset)
DVD/CD
DVD and CD (Preset)
DBS
DBS STB & CBL STB (Preset)
RCVR
Audio Receiver (Preset)
CBL
Cable (Preset)
Personal Video Recorders,
AUX
Cassette and VCR2
Note:
Determine the manufacturer of the component and look
in the table for the code.
Procedure
•
Confirm that the external component is plugged and
operating.
•
Turn the component off.
•
Press
and
OK
seconds.
•
Press appropriate component button on the Remote
Control VCR, DVD, DBS, RCVR, CBL or AUX (PVR or
VCR2)
•
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons).
•
Press the Remote Control
If the procedure was successful, the component will
turn on.
Note:
If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
"sequence method."
•
Confirm that the external component is plugged in
and on.
•
Turn the component off.
•
Press
OK
seconds.
•
Press appropriate component button on the
Remote Control.
•
Press VOL
Press
VOL to move backward.
16
Default
Panasonic Code
Panasonic Code
Panasonic Code
Panasonic DBS Code
Panasonic RCVR Code
Panasonic CABLE
Code
Panasonic Personal
Video Recorder Code
POWER
together, for at least 5
POWER
to test the component.
POWER
and
together, for at least 5
to move forward to the next code.
•
Press the Remote Control
component. If the procedure was successful, the
component will turn on.
Note:
Repeat the above steps until the component code is
found. It may take many attempts before the correct
code is found.
•
After the code is found, press
code.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR
DVD
DBS
RECEIVER
AUX (PVR)
AUX (VCR2)
POWER
to test the
to store the
OK
DVD (CD)
CABLE
Capítulos
Tabla de contenido
