Enerpac IPR-5075 Hoja De Instrucciones página 4

5. Drive fork truck from the front into the frame assembly,
position forks under bolster, and raise the frame until it
contacts the press bed.
6. Insert angle-bearing assembly securely with
bolts and washers. See Figure 6.
7. Tighten angle bearing assembly securely with
3 ⁄ " bolts and washers. See Figure 7 (A).
4
5 ⁄ -11 X 1
8
Figure 6
A
Figure 7
8. Secure P141 hand pump to left frame rail of press using
the hardware provided. See Figure 8.
3 ⁄ "
4
5 ⁄ -11 X 1
8
9. Install tubing from P141 hand pump to mini-cylinders in
angle bearing assembly following tubing layout. See
Figure 9. Figure 10 (page 5) shows the correct P141
and left mini-cylinder connection.
4
Figure 8
Figure 9