auna Milano 10034605 Manual Del Usuario página 19

1
Insert the bolts (A) into
the holes in the main
body (1). Insert the legs (3)
into the main body and
screw the bolts (A) into
the holes in the legs.
4
Screw the D nuts (B) and
the nuts (C) into the table
top (1) from above as
shown.
2
Screw the D nuts (B) and
nuts (C) into the main
body (1) from above as
shown.
5
Tighten all fasteners with
the key (D).
3
Insert the bolts (A) into
the holes in the table top.
Place the table top on the
notches of the legs (3) and
screw the bolts (A) into
the holes in the legs (3).
6
Place the covers (E) on
the holes on the main
body and on the table
top and finally attach the
protective pads to the
legs.
EN
19