Resumen de contenidos para Microban MEDLINE ELEMENTS MDS89664ELMB
Página 1
MEDLINE ELEMENTS BEDSIDE COMMODE INODORO PORTÁTIL PLeaSe read User Instructions and Warranty CarefULLy Instrucciones para el usuario y garantía Before USinG MDS89664ELMB yoUr medLine Commode. To ensure the safe installation, adjustment, and operation of Medline Elements Commode, these instructions MUST be followed.
Maximum weight capacity: 400lbs During use, evenly distribute weight between the arm supports. Cleaning 1. The bedside commode features built-in Microban ® antimicrobial protection to help prevent the growth of stain and odor causing bacteria, mold and mildew to keep it cleaner for longer.
Página 3
maintenance » Periodically inspect the bedside commode for damage or loose components. » Ensure all push buttons are protruded from the extension legs. » Check the rubber feet on the leg extensions for rips or wear. If any of these conditions exist, or if they are missing, replace them immediately.
Página 4
Part one: attaching Legs to main commode compartment Below parts will be needed to assemble the legs to the main commode compartment and seat. Step 1: Line up the leg mainframes (B) with the main commode compartment (A). Start by flipping the commode compartment (A) upside down. Match up the holes on the leg mainframes (B) with the holes on the bronze brace (L) on the outside of the commode compartment (A).
Página 5
NOTE: It is recommended that all four hand screws (C) for a sin- gle leg mainframe (B) be loosely crewed into place. Once all the screws are in place then fully tighten through the aligned holes. Step 3: Attach leg extensions (D) to leg mainframes (B). Depress the push-buttons on the mainframe and place feet leg extensions (D) over leg mainframe (B) until secured at desired height position.
Página 6
Part tHree: assemble the Backrest PARTS NEEDED STEP 2 STEP 1 Step 1: Attach the Backrest (H). Slide the backrest (H) down over the backrest extension bars (F). Press down the push buttons on the backrest extension bars (F) and slide the backrest (G) down over the push buttons until the backrest locks into place.
Página 7
Medline Elements™ Bedside Commode has multiple adjustment points to create a custom fit that keeps you comfortable while bathing. Use the push-buttons on the various adjustable features to find the setting that you like best. Once you have made an adjustment please make sure push-buttons on both sides are fully protruded and secure before using.
Página 8
Cleaning a commode after it is used is an unpleasant job for caretakers. In addition, being cleaned up after can be a source of embarrassement for those using the commode. Medline Commode Liner with Absorbent Pad answers those concerns. - Safe collection - Solidifies liquids - Eliminates Odor - Easy disposal of body fluids...
Durante su uso, distribuya el peso en forma pareja entre los apoyabrazos. Limpieza 1. El banco para baño presenta una protección antimicrobiana Microban® incorporada para ayudar a prevenir el crecimiento de bacterias, moho y hongos que causan man- chas y olores, y así mantener el producto más limpio durante más tiempo. * 2.
mantenimiento » Inspeccione periódicamente el inodoro portátil con el fin de verificar que no esté dañado ni que algún com ponente esté suelto. » Asegúrese de que todos los botones pulsadores sobresalgan de las patas extensibles. » Verifique que las puntas de caucho en las patas extensibles no presenten rasgaduras ni desgaste.
Parte Uno: fije las patas al compartimento principal del inodoro Se necesitarán las piezas inferiores para ensamblar las patas al asiento y al compartimento principal del inodoro. Paso 1: Alinee los armazones para las patas (B) con el compartimento principal del inodoro (A).
nota: Se recomienda que se atornillen ligeramente en su lugar los cuatro tornillos a rosca (C) de cada armazón para las patas (B). Una vez que todos los tornillos estén en su lugar, ajústelos por completo en sus orificios alineados. Paso 3: Fije las patas extensibles (D) a los armazones principales de las patas (B).
Parte treS: ensamble el respaldo Piezas necesarias Paso 1 Paso 2 Paso 1: Fije el respaldo (H). Deslice hacia abajo el respaldo (H) sobre las barras extensibles del respaldo (F). Presione los botones pulsadores de las barras extensibles del respaldo (F) y deslice el respaldo (G) hacia abajo sobre los botones pulsadores hasta que el respaldo se trabe en su lugar.
Página 14
El inodoro portátil Medline Elements™ tiene múltiples puntos de ajuste que logran una posición personalizada para su comodidad durante el baño. Use los botones pulsadores de realizar los diferentes ajustes y así encontrar la posición de su preferencia. Una vez logrado el ajuste, asegúrese de que los botones pulsadores en ambos lados sobresalgan por completo y asegúrelos antes de usar el producto.
Página 15
La limpieza del inodoro luego de su uso puede resultar una tarea incómoda para los asistentes. También, los usuarios del inodoro pueden sentirse avergonzados por tener que recibir ayuda para limpiarse. La funda para inodoro con almohadilla absorbente de Medline es la solución a estos problemas. Recolección segura Solidifica los líquidos Elimina el olor...