Dake SL913 TW Instrucciones De Uso Y De Montaje página 13

USES
The appliance is already arranged both for filte-
ring and for suction performances.
* In its filtering version (Fig. 1), the air and fu-
mes conveyed by the appliance are depured both
by a grease filter and by an active coal filter, and
put again into circulation through the hole made
on the top of the cabinet.
* In its sucking version (Fig. 2), fumes are di-
rectly conveyed outside, through an evacuation
duct connected with the superior part of the wall
or the ceiling. Both coal filter and air deflector are
not necessary in this case.
INSTALLATION
In order to ease the installation of the product in-
side the cabinet, it is recommended to remove
the glass, unscrewing the four M3x10 screws as
shown in Fig. 6.
* Before installing the appliance, in order not to
damage the appliance itself, the metal grase filter
should be removed. Such filter can be removed
by pushing the special filter handle toward the
back side of the cooker hood and turning it down-
wards so to unfasten it from its slot (Fig. 3).
Essential precautions to respect before installing
the appliance are the following:
To have made a cut-out on the bottom of the ca-
binet which is suitable to hold the appliance in
position (fig. 4).
* prepare the power supply.
* prepare a hole for the exhaust of the air both in
the filtering and in the exhauting version.
To install the appliance, adjust the position of the
stop side-springs using the appropriate screws
(fig. 5), according to the thickness of the board
previously drilled, on which the appliance will be
fixed.
Insert the built-in unit in the hole made in the cabi-
net until the stop click of the side- springs is heard
and the built-in unit is blocked (fig. 7).
Insert the screws provided in the holes inside the
appliance (fig. 7A) to block it completely.
Blocking of the stop valve
Warning!
Before connecting the flexible exhausting pipe to
the motor, make sure the stop valve, which is on
the air outlet of the motor, can swing.
Exausting version
Connect the flange to the exhausting hole with an
appropriate pipe. Connect the appliance with the
electrical mains through the supply cord.
Filtering version
Connect the flange with a pipe suitable to con-
vey the air to the top of the cabinet. Connect the
appliance with the electrical mains through the
supply cord.
13