Seat Functions And Operation; Weight Adjustment; Fore/Aft Adjustment - Grammer PRIMO Professional S Manual Del Usario

* if fitted ** depending on model
GB

Seat functions and operation

Weight adjustment

The seat is adjusted for the driver's weight by
pulling or pressing the lever for seat weight
adjustment and with the driver sitting on the
seat.
The driver's weight is adjusted correctly when
the arrow is in the middle clear area of the
viewing window.
Within this viewing area, the individual height
can be adjusted to a minimum spring
movement.
When the minimum/maximum weight
adjustment has been reached, you can hear it
reaching the upper or lower end stop.
To prevent damage to the health and
material, the setting for the driver's weight must
be checked and adjusted individually before the
vehicle is driven.
In order to avoid compressor damage
during weight adjustment, the compressor must
be operated no longer than 1 minute.

Fore/aft adjustment

The fore/aft adjustment is released by lifting the
locking lever.
WARNING! Risk of accident!
Do not operate the locking lever
while driving.
WARNING! Risk of crushing!
Only touch the lever at the
indented grip, do not reach back
under the lever.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to move
the driver's seat into another position when it is
locked.
Do not lift the locking lever with your leg
or calf.
*** optional extra
21