OHAUS i-DT61XWE Manual De Instrucciones página 8

Ocultar thumbs Ver también para i-DT61XWE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
EN-6
Host Name
The Host Name is the name of the Ethernet option board in the network. The
default is "OHETHER".
MAC Address
The Medium Access Control (MAC) Address of the Ethernet option board is not
editable.
Port
The Ethernet option board has a TCP server, with the port of 9761 (unmodifiable).
DHCP
If DHCP is set to be ON, the IP share or router will automatically assign IP Address.
If the DHCP is set to be OFF, users need to setup the IP Address, Subnet Mask,
Gateway, Primary DNS and Secondary DNS. The Interface has a preset IP
Address. The Port Number is always 9761 and cannot be changed.
Note: After the setup of the IP Address, Gateway, Preferred DNS and Alternate
DNS, please reboot the indicator to enable the setting.
IP Address
IP is 192.168.1.1 by default.
Subnet Mask
Subnet mask is 255.255.255.0 by default.
Gateway
Gateway is 192.168.1.1 by default.
Primary DNS & Secondary DNS
DNS value is not needed when the system is connected to a LAN, while the DNS
value is assigned by the ISP when it is connected to the internet.
Alternative Command
The alternative command of Print, Tare, Zero can be set to 'a' ~ 'z' or 'A' ~ 'Z'.
Note:
1.
The submenu will be displayed after the installation of the Ethernet option
board.
To set the IP address and other parameters, you need to go to the ScaleMate
2.
software. To obtain it, contact an authorized OHAUS dealer.
Tabla de contenido
loading

Tabla de contenido