Tools And Materials; Before You Begin - Kohler K-1278 Guia De Instalacion

Tools and Materials

Pencil Tape Measure
Square Drill
Drill/bits

Before You Begin

Observe all local plumbing and building codes.
Unpack and inspect the apron for damage. Return the apron to the carton until you are ready to
install it.
The apron must be installed before the finished floor and wall materials are installed.
This apron system is designed to have the finished wall materials [1-1/2" (38 mm) maximum
thickness] go over the apron columns. It is also designed to have the finished floor materials [2" (51
mm) maximum thickness] butt up against the channel.
The apron can be used as an access to the whirlpool pump and controls, when applicable. However,
additional access may make servicing of the pump and controls easier.
NOTE: Before installing the apron, fill the bath/whirlpool with water and check the drain system for
leaks. If applicable, test the whirlpool system for leaks and proper operation.
1018323-2-D
Flat Blade
Screwdriver
Safety Glasses
2
Philips
Screwdriver
Plus:
Construction Adhesive
Conventional Woodworking Tools
and Materials
Support Structure Materials (2x2's or 2x4's)
Shimming Materials (as needed)
Rubber Pads
Kohler Co.