Lenze M 13.71 Serie Manual Del Usuario página 12

Notes for mounting
ƒ Before transport
– Check that all transport locking devices are mounted.
– Tighten all transport aids.

Note!
Do not apply extra loads to the product as the transport aids (such as eye bolts
or bearing plates) are designed for the weight of the motor only (refer to the
catalogue for the weight).
ƒ Use an appropriate means of transport and lifting equipment!
ƒ The shaft must not be exposed to knocks or bumps! Motor can be destroyed! Drive
elements must be mounted on the motor shaft via the threading. An extracting
device must be used when dismounting. Fasten coupling securely.
ƒ Fasten motor and ensure unimpeded ventilation.
ƒ Tighten coupling ring of connector.
ƒ Motor must be carefully earthed, check cabling.
ƒ Extensive shielding of motor cable on motor and controller.

Stop!
Observe maximally permissible screw-on depth for B14 flange!
C
Motor type/size
13.710.35
13.710.47
13.710.55
13.750.45
13.750.55
13.750.65
ASPL 13.1001 DE/EN/FR/IT/ES 1.0
Flange size [mm]
FT40
FT45
FT65
FT45
FT65
FT75
12
c max. [mm]
10
10
14
7
7.5
8
s
M4
M4
M5
M5
M5
M5
