Tabla de contenido
Idiomas disponibles
Idiomas disponibles
10.4. Muting audio output
Press the
button on the remote control to mute audio playback on the
soundbar.
When the mute function is active, MUTE flashes on the display.
10.5. Setting sound eff ects
Press the EQ button on the soundbar or one of the NORMAL, VOICE, MOVIE,
MUSIC buttons on the remote control to set the corresponding sound effect.
10.6. Setting the bass
Press the
button on the remote control to amplify the subwoofer base
effect.
Press the
button on the remote control to reduce the subwoofer base effect.
The corresponding bass setting in the control range -5 to +5 is shown on the
display.
10.7. Setting the vertical surround sound eff ect
Use the VERTICAL SURROUND button on the remote control to set the vertical
surround sound effect.
Press the VERTICAL SURROUND button to switch on the sound effect.
SR ON is shown on the display.
Press the VERTICAL SURROUND button again to switch off the sound effect.
SR OFF is shown on the display.
When playing back audio/video material with a Dolby Atmos
soundtrack, ATMOS is shown on the soundbar display when playback
starts. When playing back audio/video material without a Dolby Atmos
soundtrack, PCM is shown on the soundbar display when playback
starts.
11. Audio playback in Bluetooth
If you have connected the soundbar to a device that supports the A2DP and AVRCP
profiles (Audio Video Remote Control), the soundbar is used as an output medium
and all audio signals are only output via the soundbar.
If you have connected the soundbar with your Bluetooth-enabled
mobile phone, the music playing through the soundbar is interrupted
when you receive a call, and only continues when you finish the call.
Press the
button on the remote control to start playing tracks.
To pause playback, press the
playback.
During playback, press the
62
button again. Press this button again to resume
button once to jump to the start of the track.
™
®
mode
™
Capítulos
Tabla de contenido
