Using The Remote Control; Using The Buttons - Insignia NS-R5101 Guia Del Usuario

To adjust the sound parameters:
1 Press the SOUND PARAMETER button.
2 Press the select
parameter.
3 Press the select
parameter.
4 Repeat the above procedure to adjust the
other parameters.
Adjusting each channel level with test tone
The volume level of each channel can be
adjusted easily with the test tone function.
Note
When the SPEAKER button is set to off, the test
tone function does not work.
To adjust each channel level:
1 Press the TEST button.
The test tone mode is displayed and is heard
from each channel's speaker for two seconds
as follows:
• FL—Front Left
• C—Center
• FR—Front Right
• SR—Surround Right
• SL—Surround Left
• SW—Subwoofer
Note
When the speaker setting is "N (NONE)", the test
tone of the corresponding channel is not available.
2 At each channel, press the select
buttons to adjust the level as desired until the
sound level of each speaker sounds equally
loud.
3 Press TEST to cancel the test tone function.
22
or buttons to select the
or buttons to adjust the
or
www.insignia-products.com
Insignia NS-R5101 5.1 Surround Sound A/V Receiver

Using the remote control

Using the buttons

Item Description
1 STANDBY button
2 SLEEP button
3 DIMMER button
4
VOLUME /
buttons
5 MUTE button
6 CHANNEL LEVEL
button
7 SETUP button
8 MEMORY/ENTER
button
9
SELECT button
10 Surround mode </>
buttons
For more information, see...
"Using your receiver" on page 24.
"Using the sleep timer" on
page 29.
"Adjusting the display brightness"
on page 29.
"Using your receiver" on page 24.
"Using your receiver" on page 24.
"Adjusting the current channel
level" on page 20.
"Navigating through the setup
menu" on page 17.
"Memorizing the adjusted channel
levels" on page 21.
"Navigating through the setup
menu" on page 17.
"Enjoying surround sound" on
page 26.