Technical Data - Festo CPV-DI01 Serie Breve Descripción

CPV-DI01
6

Technical data

Typ
Protection class as per EN 60 529
(DIN 40050)
Temperature range:
– operating
– storage/transport
Pin 1 - Supply voltage
Electronics
– Nominal value
– Tolerance
– Current consumption
Pin 2 - Valve load voltage connection
– Nominal value
– Tolerance
– Current consumption
Galvanic isolation
Protected against electrical shock
(protected against direct and indirect
contact per EN 60204-1/IEC 204)
– Interference emission
tested to EN 55011
– Immunity to interference
tested to EN 50082-2
*)
The CP valve terminal may also be used in residential areas (residential,
business and industrial areas, small businesses) with individual approval.
18
CPV..-DI01
IP 65 (when connector is attached or
cover cap installed)
o o
- 5 C ... + 50 C
o o
-20 C ... + 70 C
DC 24 V
20.4 ... 26.4 V
max. 100 mA
DC 24 V
20.4 V ... 26.4 V
Sum of all activated CP solenoids; for
current draw see "CP Pneumatics"
bus interface opto-isolated
by connecting to a PELV power supply
(Protected Extra-Low Voltage)
*)
Limit value class A
9904NH