Feeding Procedures; Cleaning - Skymsen LC2 Manual De Instrucciones

3.2 Feeding Procedures

Before to use the equipment, all the parts to be in contact with the product to be processed
shall be washed with water and neutral soap.( see item 3.4 cleaning ).
Make sure the equipment is firm on its place.
Remove the Lid # 01 (Pic.01) together with the Cap # 10 (Pic. 01)
With the blender switched OFF place first the liquid product, then place into the the Cup
the receipt more consistent products.
Place the Lid with its Cap as instructed item 2.2.2 and 2.2.3
The processing time depends on the kind of product. It is not recommended to
blend products without the addition of any liquid, otherwise it will overheat and
NEVER SWITCH THE MACHINE ON WITHOUT LOAD IN IT BECAUSE IT WILL CAUSE

3.3 Cleaning

Never do cleaning with the machine plugged in. Always unplug the machine before
When the equipment must go through a complete cleaning process :
- before to be used first time.
- After every day end of operations
- When the blender is not going to be used for a long period of time.
- Before to start operation after a long period it has not been used.
Many parts may be removed for cleaning :
- Cup #02 (Pic.01)
- Lid # 01 (Pic.01)
10
IMPORTANT
damage the Cup seal.
IMPORTANT
IRREPARABLE DAMAGES.
IMPORTANT
cleaning.