Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MANDITORY
WARNING
These signs will give
advice for your safety
Before leaving our factory every machine is
thoroughly tested.
Follow our instructions strictly and your machine will
give you long service in normal operating conditions.
1
Features
Use:
Sawing of any kind of tile, up to 19" (482mm)
diagonal on 13" x 13" (330 x 330mm) tile.
Tools: Rip Guide comes standard on all tile saws. See
Tile Cutting Accessories on page 18.
(For information or availability of other accessories contact
your Felker supplier.)
Blade Capacity: Rim Ø 10" (254mm) - bore 5/8"
(15,9mm).
Profile Wheel: Rim Ø 7" (180mm) - bore 5/8" (15,9mm).
Blade Rotation: Counter-Clockwise (CCW).
Depth of Cut: 3-3/4" (95mm) with 10" (254mm) blade.
Horsepower:
1-1/2
Voltage:
115
Hertz
60
F.L. Amperages:
14.6
Blade Shaft RPM:
2760
Weight: lb. (kg.)
118 (54)
Dimensions - L x W x H: in
(mm)
Conveyor Cart - L x W: in (mm) 12" x 17-1/4"
Pan Holding Capacity: 6.5 gallons (24.7 liters)
Water Pump Output:
100 gal/hr. (378 l /hr.)
Any persons not involved in the work should
leave the area.
I N S T R U C I T O N
INDICATION
INFORMATION
PROHIBITION
1-1/2
1
115/230
240
60
50
17.2/8.6
7.2
3880
2750
122 (55)
115 (52)
36" x 19-3/4" x 20-3/4"
(914 x 502 x 527)
(305 x 438)
The operator must wear
protective
clothing
appropriate to the work he is
doing.
Use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
Before starting up the machine, make sure you
read this entire manual and are familiar with the
operation of this machine.
The working area must be completely clear, well
lit and all safety hazards removed.
2
Benefits
•
The new, improved blade guard offers simplified blade
installation and removal - maximum 10" (254mm) blade
capacity. The external water tube assembly (H) is
removable for easy maintenance.
•
1-1/2 HP, High Torque (HT) 115V/60/1 motor on stan-
dard saw.
•
The dependable, high volume, submersible coolant
pump features a screened intake.
•
The motor and pump power cords are securely mounted
directly into the Motor Housing (O).
•
The removable Drain Plug (P) at the back end of the
pan permits easy coolant draining and quick sludge
clean out. The Water Pan (3) is removable for easy
cleaning.
•
The free-rolling Conveyor Cart (4) is aligned for straight,
smooth cuts. The Back Stop with ruler allows fast mount-
ing and adjustment of the Rip Fence (R) and optional
accessories.
•
Makes diagonal cuts on 13" x 13" (330 x 330 mm)
tile. Can make 19" (360mm) rip cuts.
•
Full-size belt shield and belt protection.
•
The adjustable pan allows the operator to cut tile
comfortably with a full view and control of work with
minimum stretching.
3
Machine Set-Up
(See Figure 1)
•
Remove all items from the shipping carton and identify:
1.
Pivot Cutting Head Assembly: Includes Water Tube
Assembly (H)
2.
Frame Assembly
3.
Water Pan Assembly
4.
Conveyor Cart Assembly Carton {Cart Assembly
(4) and Rip Guide (R)}
5.
Water Pump and Accessory Carton: Includes
Water Pump (E), Hose Barb (F), Water Valve (G),
15/16" Wrench (N), Drain Plug (O), Locking Knob
(C) with 5/16" flatwasher and Set Collar (B).
6.
Literature Assembly Envelope
13
Tabla de contenido
