Handicare EasyGlide SystemRoMedic 5050 Manual Del Usario página 4

Placement/removal of EasyGlide
Using EasyGlide
Material:
Polyethen
Care of the product:
Clean EasyGlide with water and
disinfectant.
4
Place the wheelchair at an angle towards the side of the bed, and as close
to the bed as possible. Remove the armrest that is closest to the bed and
remove leg supports. Place the EasyGlide like a bridge between the bed
and the wheelchair. If it is an EasyGlide model on which one long side can
be bent, this should be placed against the wheelchair wheel.
To position the EasyGlide under the patient, lean the patient slightly in the
opposite direction.
When the transfer is complete, EasyGlide is removed by bending upwards.
Active patients can transfer themselves with the help of EasyGlide. Grasp the armrest and lean
over towards the wheelchair. It is important to remember to lean once more towards the bed
when the transfer is complete, so as to be able to move back in the middle of the chair and slide
all the way back.
If the patient requires support and assistance during the transfer, the EasyGlide should be
complemented with an EasyBelt/FlexiBelt.
The caregiver can work from behind or in front of the patient.
Tips! Our FootStool can be used to advantage to raise the knees
EasyGlide can also be used for transfers into and out of a car.
Medical Device Class I
The product meets the requirements of the Medical Devices
Directive 93/42/EEC.
Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com
for a complete list of distributors. Always make sure that
you have the right version of the manual. The most recent
editions of manuals are available for downloading from our
website, www.handicare.com.
English
SystemRoMedic
M A N U A L
TM