Assembly Instructions - Blue Hawk BFT46 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Each brush assembly has one brush retainer
marked with either red or black ink. Lay out the
brush assemblies (I) so that the brush retainers
marked with red and black ink are in the middle
and positioned as shown.
2. Tip the sweeper housing (A) forward until it rests
as shown in figure 3.
3. Place the brush assembly (I) with the red
brush retainer on the brush shaft attached to
the sweeper housing (A) so that the red brush
retainer is positioned in the middle of the shaft.
Attach it to the shaft using two 1/4 x 1 hex bolts
(GG) and 1/4 nylock nuts (HH).
Hardware Used
GG
1/4 x 1 Bolt
HH
1/4 Nut
1
OVERLAP BRISTLES
2
3
x 2
x 2
6
BRUSH RETAINER
MARKED RED
BRUSH RETAINER
MARKED BLACK
RED MARK
Lowes.com