Important - Blue Hawk BFT46 Manual Del Usuario

18. Insert the bag frame strap (N) into the stitched
sleeve along the front edge of the bag bottom
and attach it to the lower hopper side tubes
(L) using two 1/4 x 1-1/8 clevis pins (QQ) and
3/32 hair cotter pins (SS).
Hardware Used
QQ
1/4 x 1-1/8 Clevis Pin
SS
3/32 Hairpin Cotter
19. Secure the bag corners around the lower
hopper side tubes (L) by snapping the bag
flaps to the bag bottom on both sides.
20. Place the ends of the hopper support rods (M)
into the upper and lower rear hopper tubes
(J), bending the rods just enough to fit into the
holes in the tubes.
IMPORTANT: Do not over bend the rods.
Over bending will cause the steel rods to
loose supporting tension.
18
x 2
x 2
19
SNAP
20
12
FLAP
Lowes.com