Forno FRHWM5029-30HB Manual De Instrucciones página 17

How to replace LED strip light
Step 1: Remove light panel by removing screws in "H" location
Note: Please take extra care to make sure you do not damage the range hood
Step 2: Turn the three screws at the back of the LED light counterclockwise
Step 3: Remove the LED light through the connector
Replace the new LED strip light with connector and install three screws clockwise, attach light panel to
the hood with screws in the "H" location.
How to install heat light
Infrared heat light --110V/60Hz, 220W, E26 type
Place the light into the light holder, turn clockwise to tighten heat light. Turn the heat light
counterclockwise to disassemble
WARNING
CAUTION-HOT SURFACE
Heating lamp, rated 120 VAC,220W
Disconnected from the supply source before installing the light
CAUTION: DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot
even though they are dark in colour. Areas near surface units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials touch surface units or
areas near units until they have had sufficient time to cool. Among these areas are (identification of
areas – for example, the cook-top and surfaces facing the cook-top).
Connector
Screws for installing LED
strip light