Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.3 Label reprint
If the last label printed has not been cleared from the printer buffer, pressing
the FEED button causes the last printed label to be reprinted.
4.4 Sending data to the printer
To print labels using data sent from a host computer or terminal:
1.
C
onnect the host and printer serial or parallel ports together using a
c
orrectly wired interface cable.
2.
If
you are using the serial port, confirm that the host and printer are using
th
e same communication parameters.
3.
C
onfirm that the POWER indicator is lit and the ERROR indicator is off.
4.
S
end your data to the printer.
4.5 Resetting the printer
Some commands with parameters can be saved in the printer. They are in non-
volatile memory, E
changed by other commands with different parameters. To reset the parameters
to factory settings, follow the procedure below.
1
. Install ribbon and media.
2
. Turn on the printer.
2
PROM, they can be kept permanently unless they are
11
Capítulos
Tabla de contenido
