Electrode Cable - HACH LANGE si627 P Manual De Instrucciones

3. Installation

3.2. Electrode cable

Coaxial cable
Installation of BNC connector to the cable
The instrument is supplied with a BNC connector, to be screwed directly (without weldings) to the coaxial
cable. To assemble it, the cable must be prepared and the connector screwed (see diagram below).
5 mm
Ø
0,2 in
Coaxial cable
Using a triaxial cable the connector is assemblied in the same way as with the coaxial cable, leaving
the "additional" shielding and the outer protector out of the connector. The additional shielding must be
connected to ground.
10
si627 P_HACH_LANGE_Ed.0510.indd ANG:10 si627 P_HACH_LANGE_Ed.0510.indd ANG:10
PVC protector Ø 5 mm.
Shielding
Plastic conductor (black).
PE insulation.
Inner conductor.
7 mm
0,3 in
Cable preparation
Triaxial cable
7 mm
0,3 in
Cable with connector already screwed
PVC protector Ø 7 mm.
Additional shielding.
(See Important notes
page 9).
20/5/10 10:50:45 20/5/10 10:50:45