Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SWITCHING THE COOKING TOP ON
Press
key to switch the top on.
All the displays relative to the cooking zones switch on in
the
standby position.
The control unit remains active for 10 seconds.
If no cooking zone is selected within this time, the ccoking
top switches off automatically.
SWITCHING THE COOKING AREA ON
Select the desired cooking zone and press one of the
keys.
to go to position 9 (max. power) or key
Press key
go to position 1 (min. power).
Once this operation has been completed you can adjust the
temperature with the
The power of the single cooking zone can be adjusted in 9
different positions and will be shown on the relative luminous
display E with a number from "1 to 9".
RESIDUAL HEAT
If the temperature of the cooking zone is still high (over
50°) after it has been switched off, the relative display will
indicate the
symbol (residual heat). The symbol will only
switch off when the burn risk in no longer present.
POT DETECTION
If the symbol
should appear on one of the cooking area
displays, it means that:
1)The recipient being used is not suitable for induction
cooking.
2)The diameter of the recipient used is inferior to that
allowed by the appliance.
3) No recipient is present.
TIMER
This function allows establishing the time (from 1 to 99
minutes) for automatically switching the selected cooking
zone off. Switch on at least one cooking zone and adjust
the temperature.
Press simultaneously the
the timer function. Press again the
simoultaneously to select the cooking zone on which you
want to activate the timer. The selected cooking zone will
be indicated by a flashing led located on one of the corners
of the timer display F.
Set the auto switching off time by pressing the
H key. The cooking zone on which the timer has been
activated is indicated by a steady led at one of the corners
of the timer display I.
An acoustic signal will indicate the timer expiration and the
relative cooking zone will automatically switch off. Press
any of the keys to stop the acoustic signal.
In order to disable the timer on a cooking zone press
simultaneously the
timer function.
Press again the
simoultaneously to select the desired cooking zone. Press
the
H key until reaching position
QUICK / BOOSTER HEATING
This function further reduces cooking time in a given area
taking the temperature to the maximum power for a 10
minute interval. At the end of this interval, the cooking
area power automatically returns to level 9.
The use of this function is recommended for heating a
large quantity of liquid in a very short time (i.e. water for
cooking pasta) or other dishes.
To activate this function, select the cooking area and
press the key
up to level 9. Press the
An acoustic signal will be emitted and a symbol
visualised on the display E relative to the area.
CONTROL PANEL LOCK
It is possible to block the controls to prevent the risk of
unintentional modification of the settings (children, cleaning
or
keys.
G and
H key to enter
G and
G and
H key to enter the
G and
.
key again.
etc.). By pressing the
the relative warning light I switches on (Fig.9)
To release the controls and change the settings
(e.g.interrupt cooking), the
cooking top can however be switched off even when the
controls block is activated. In this case the controls block
remains active when the top is switched on again.
SWITCHING THE COOKING AREA OFF
To switch a cooking zone off, press simultaneously the
and
key of the relative zone, or press the
to
reaching position
SWITCHING THE COOKING TOP OFF
To turn off the cooking top entirely hold down the
SAFETY SWITCH
The appliance has a safety switch that automatically
switches off the cooking zones when they have been oper-
ating for a certain amount of time at a given power level.
POWER LEVEL
1 - 2
3 - 4
5
6 - 7 - 8 - 9
MAINTENANCE
Remove any residues of food and drops of grease from the
cooking surface by using the special scraper supplied on
request (Fig.10).
Clean the heated area as thoroughly as possible using
suitable products, and a cloth/paper, then rinse with water
and dry with a clean cloth.
Using the special scraper immediately remove any
fragments of aluminium and plastic material that have
unintentionally melted on the heated cooking area, or
H key
residues of sugar or food with a high sugar content.
In this way, any damage to the cooktop surface can be
prevented. Under no circumstances should abrasive
sponges, or corrosive chemical detergents, such as oven
sprays or stain removers, be used.
G or
WARNING: STEAM CLEANERS MUST NOT BE USED.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances
must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must
be collected separately in order to optimise the
H key
recovery and recycling of the materials they
contain and reduce the impact on human health and the
environment.
The crossed-out dustbin symbol on the product reminds
you of your obligation regarding separated waste collection.
Consumers should contact their local public service or their
local dealer for more information on the correct disposal of
exhausted household appliances.
THE
MANUFACTURER
RESPONSIBILITY
CAUSED BY BREAKING THE ABOVE WARNINGS. THE
WARRANTY IS NOT VALID IN THE CASE OF DAMAGE
CAUSED BY FAILURE TO COMPLY WITH THE ABOVE-
MENTIONED WARNINGS.
will be
key, the controls are blocked and
key must be pressed. The
.
OPERATING TIME LIMIT (hours)
6
5
4
1,5
DECLINES
FOR
EVENTUAL
key until
key.
ALL
DAMAGES
9
Tabla de contenido
