Safety Instructions; Intended Use; Environmental Protection - Ryobi RLS4A Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para RLS4A:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9

SAFETY INSTRUCTIONS

WARNING
Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, fi re and/or serious personal injury.
Keep work area clean. Cluttered areas and benches
invite accidents. Do not leave tools or pieces of wood
on the tool while it is in operation.
Make sure the work area has ample lighting to see
the work and that no obstructions will interfere with
safe operation before performing any work using
your tool.
Do not use in dangerous environments. Do not use
power tools in damp or wet locations or expose to rain.
Keep the work area well lit.
Keep the operator zone and adjacent area clear for
safe, secure footing.
Danger! Keep clear of moving parts.
Make sure the log splitter is on a level surface.
Block the splitter as required to prevent unintended
movement.
Make sure the log splitter and any accessories are
properly installed and securely fastened.
Use the proper extension cord. Make sure your
extension cord is in good condition. Use only a
cord heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
Electrical power should be supplied via a residual
current device (RCD) with a tripping current of not
more than 30 mA.
Keep all bystanders especially children and pets, at
least 15 m from the operating area.
Only one person is permitted to operate the log
splitter.
Before use, examine the power cord or extension
cable for damage. If there are signs of damage, it
must be replaced by a qualified service technician.
Before use, check that there are no damaged parts.
A defective switch or any part that is damaged
should be properly repaired or replaced by an
authorized service facility.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions
that may affect its operation. A guard or other part that
is damaged must be properly repaired or replaced by
an authorized service center to avoid risk of personal
injury.
Never leave tool running unattended. Turn the power
off. Do not leave tool until it comes to a complete stop.
Never use in an explosive atmosphere. Normal
sparking of the motor could ignite fumes.
Dress properly. Do not wear loose clothing,
neckties, or jewellery that can get caught and draw
you into moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Also wear protective hair covering to contain long hair.
Always wear safety glasses with side shields.
Everyday eyeglasses have only impact-resistant
lenses, they are not safety glasses.
Do not operate a tool while under the influence of
drugs, alcohol, or any medication.
Disconnect tools. When not in use, before servicing,
or when changing attachments, blades, bits, cutters, all
tools should be disconnected from power source.
Maintain tools with care. Keep tools sharp and clean
for better and safer performance. Follow instructions for
lubricating and changing accessories.
Use
recommended
operator's manual for recommended accessories. The
use of improper accessories may result in injury.
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.

INTENDED USE

You may use this product for splitting logs and freeing
jammed logs.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOL
Wet conditions alert
Conformance to technical regulations
Please read the instructions carefully
before starting the machine.
Wear eye protection
Safety alert
English
accessories.
Consult
the
1
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
Tabla de contenido
loading

Este manual también es adecuado para:

Rls5a

Tabla de contenido