Technical Data; Noise Information; Vibration Information - Ratio MR800NM Manual De Instrucciones

TECHNICAL DATA

Type MR800NM (31-designation of machinery, representative of Hammer)
Voltage
Power input
No load speed
Impact rate
Impact energy
Chuck type
Drilling capacity max
Steel
masonry
Wood
Protection class
Machine weight

NOISE INFORMATION

When tested at hammer & drill mode:
When tested at hammer & drill mode:
K & K 3.0dB(A)
PA WA
And the guaranteed value according to 2000/14/EC is: L
Wear ear protection when sound pressure is over 80dB (A)

VIBRATION INFORMATION

Vibration total values determined according to EN60745
Hammer drilling into concrete
Chiseling
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
26
L : 94 dB(A)
pA
L : 105 dB(A)
wA
=105dB(A)
wA
Vibration emission value a
Vibration emission value a
Uncertainty K = 1.5m/s²
Vibration emission value a
Vibration emission value a
Uncertainty K = 1.5m/s²
230-240 V~50 Hz
=14.7m/s (main handle)
2
h.HD
=14.7m/s (auxiliary handle)
2
h.HD
=14.4m/s (main handle)
2
h.Cheq
=8.5m/s (auxiliary handle)
2
h.Cheq
800 W
0-1200 /min
0-5300 bpm
2.8J
SDS-plus
13 mm
26 mm
30 mm
/II
2.8 kg