Cleaning The Crevice Nozzle And Upholstery Brush; Cleaning The Handheld Vacuum - EASYHOME MD 18418 Manual De Instrucciones

Cleaning
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Make sure that no water or other liquids penetrate the
housing.
− Never immerse the product in water or other liquids.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage
the surfaces.
All parts should be regularly cleaned, especially when you
notice a decrease in suction power.

Cleaning the crevice nozzle and upholstery brush

− Clean the crevice nozzle
Then dry all parts thoroughly.
− If necessary, clean them under running water. Then dry all parts thoroughly.

Cleaning the handheld vacuum

1. Make sure the handheld vacuum
2
the holder
vacuum").
2. Press the unlock button
the handheld vacuum by pulling it forward (see step 1 in Fig. H).
3. Remove the dust filter
(see step 2 in Fig. H).
20
and upholstery brush
20
of the floor vacuum
19
and then remove the dust container
37 and the coarse filter
is switched off and removed from
12
1 (see chapter "Using the handheld
36
with a damp cloth.
21
16
from the dust container
from