First Use; Checking The Product And Package Contents; Preparing For Use; Assembling The Charging Station - EASYHOME MD 18418 Manual De Instrucciones

First use

First use

Checking the product and package contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product. Contact the manufacturer via the toll-free
telephone number indicated on the warranty card.

Preparing for use

1. Fold up the handle
Fig. A).
2. Remove all packaging material and protective stickers from the product and
accessories, especially from the charging contacts
handheld vacuum
To remove the protective stickers from the handheld vacuum, you must first
remove it from the holder
handheld vacuum").

Assembling the charging station

1. Insert the stand
Fig. B).
2. Connect the barrel connector
bottom of the charging station
3. Guide the power cord
the power cord out of the bottom of the charging station (see Fig. C).
16
of the floor vacuum
3
12 .
2 of the floor vacuum (see chapter "Using the
22
onto the base
26
27
25 through the voids and the recess
until it locks into place (see
1
until the stand locks into place (see
23
to the connecting socket
(see Fig. C).
14 on the back of the
31
on the
32 to extend