Troubleshooting; Cleaning - EASYHOME MD 18418 Manual De Instrucciones

Troubleshooting

Some problems may be caused by minor faults which you can rectify yourself.
To do so, follow the instructions in the following table. If this does not resolve
the problem with the product, contact After Sales Support. Never try to repair
the product yourself.
Problem
The product is not
working.
The suction power is low.
The product makes
strange noises during
operation.
Charging does not start.
Charging does not start
and the charge indicator
light flashes red.

Cleaning

WARNING!
Risk of electric!
Improper handling of the product may result in electric shock.
− Before cleaning, switch off the product and remove it from
the charging station, unplug the power adapter and pull
the barrel connector out of the charging station.
Possible cause and solution
Make sure the product is sufficiently charged.
Make sure the product is sufficiently charged.
Make sure the dust container
empty it if necessary.
Make sure the filters
them if necessary.
Immediately switch the product off and check if
the suction opening
blockage if necessary.
Make sure the product is properly placed onto
the charging station
24
adapter is properly connected to a wall
outlet.
Make sure the protective stickers covering
the charging contacts
handheld vacuum are removed.
Contact After Sales Support.
Troubleshooting
16 is not full and
36 / 37 are not dirty. Clean
18 / 38 is blocked. Remove
27 and the power
14
on the back of the
19