To Listen To Baby
• Turn on Nursery Unit using the ON/OFF switch.
• Turn on one or both Parent Units using the ON/OFF switch.
• Adjust the volume on the Parent Unit by pressing the Volume Up/Down buttons. Note that the Sound Lights LEDs
illuminate as the volume button is pressed up or down to provide a visual feedback for the volume level. The unit will beep
louder or softer depending on the volume level.
• The Sound Lights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please
note that the Sound Lights and volume control on the Parent Unit are independent of each other. With the volume turned all
the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit.
1.To turn on the Vibration Alert Feature, set the switch on the side of the parent unit to on.
2. To adjust the level at which the vibration alert is activated, press and hold the "Vibe" button on the side of the parent
unit. The sound lights will illuminate to show the vibration alert adjustment setting. Press the volume UP/DOWN switch
to change the setting. A lower sound light setting will make the vibration activate for quieter sounds. A higher sound light
setting will make the vibration activate for louder sounds. When the sound in the nursery goes above the sound light level
you choose, the vibration alert will be activated.
3. Release the "Vibe" Button.
Operation
Vibration Alert Feature
5