Using The Pipeline Inspection Reel - Milwaukee M18 2970-20 Manual Del Operador

4 PIPELINE INSPECTION REEL
Adjust the viewing angle of the WIRELESS MONITOR:
1. Loosen the adjustment arm by turning
the arm clockwise.
Adjust the tilt angle of the WIRELESS MONITOR:
1. Press the locking tilt
button to unlock the
adjustment block.

4.5 Using the PIPELINE INSPECTION REEL

Use latex or rubber gloves, goggles, face shields, protective clothing,
and respirator when chemicals, bacteria or other toxic or infectious substances
are suspected to be in a drain line. Drains may contain chemicals, bacteria and other
substances that may cause burns, be toxic or infectious or may result in other serious
personal injury.
To reduce the risk of explosion, electric shock and property damage,
always check the work area before beginning a job. Do not allow cable to contact
electrical, chemical, or moving hazards.
Do not use the push cable to clear clogs or move obstructions. This is not a drain cleaner!
2. Move the WIRELESS MONITOR to the
3. Tighten the adjustment arm
2. Turn the mounting
block towards the
opening of the drum
until it locks in place.
60
desired angle.
counterclockwise until tight.
3. Adjusting the tilt angle is useful
when using the reel in the
horizontal position.