Basic Use Airzone Think Thermostat; Temperature Settings; Operation Mode; Fan Speed - Airzone FLEXA 3.0 Manual De Instrucciones

BASIC USE AIRZONE THINK THERMOSTAT

Temperature Settings

On/Off. Pressing the icon, you will swtich on or off the zone where the thermostat is located.
Temperature control. Select the set-point temperature (0.5 °C) using the control bar.
These are the available ranges
Heating mode: 15-30° C
These ranges may vary based on the efficiency level (Eco-Adapt) selected on the master interface.

Operation mode

It displays the operation mode of the system. For Master Think thermostats, access the settings menu to change the operation
mode. The available modes are:
Stop. The air conditioning system will be off regardless of state of demand of the rest of the zones.
Cooling. In this operation mode, the system works exclusively in cooling mode when any of the zones is generating demand
(Setpoint T < room T).
Heating. In this operation mode, the system works exclusively in heating mode when any of the zones is generating
demand (Setpoint T <room T).
Ventilation. In this operation mode, the system works exclusively in ventilation mode when any of the zones is generating
demand (Setpoint T < room T).
Dry. In this operation mode the system works in dry mode, refreshing the zone (reducing the humidity) when any of the
zones is generating demand (Set-point T< Room T).
Note: This mode is ideal for high humidity days: it reduces the appearance of water particles in the grilles.

Fan Speed

It displays the the speed of the AC unit fan. For Master Think thermostats, access the settings menu to change the fan speed.
The speed is set in automatic mode by default, imposing the flow depending on the number of zones in demand.
High speed.
Medium speed.
Depending of the installation, enables to directly select the speed of the unit, setting the value 1 as the lowest speed. The
speed is set in automatic mode by default.
Cooling mode: 18-30° C
Low speed.
Automatic speed.
ES
EN
FR
IT
PT
DE
31