System Consumption; Zone Settings - Airzone FLEXA 3.0 Manual De Instrucciones

3. Press Confirm.
To activate/deactivate or modify a schedule, press the desired schedule to access the edit setting and then press the On/Off
selector or parameters to modify.
Press and hold on any schedule to see all the available settings:
Edit: Changes the name of a schedule.
To edit the name of a schedule, press and hold the name of the zone to access the name editor. Then, change the name.
Delete. It deletes a schedule.
Copy. You can copy a schedule to apply it in any other zone.
When you activate a schedule, the schedule icon is displayed as usual
crossed out. Also, the list of schedules will be deactivated although visible

System consumption

This menu displays information about the amount of time of air demand of the zone and also about the operation of the AC
unit of the system during the day.
If your system provides information on the electrical consumption, it will display the current power of the unit and the
accumulated consumption during the day.

Zone settings

From this menu you can act on:
Sleep Mode. The Sleep mode works as an auto power-off Eco-timer of the zone. These are the values you can select:
Off. The timing is off.
30. It activates the timing and switches off the zone after 30 minutes.
60. It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
will switch off.
90. It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
varies another degree the temperature. Finally, after 90 minutes, the zone will switch off.
Anti-freezing. It prevents the room temperature from dropping below 12°C, although the zone is off. (It will not activate in
Stop mode).
Depending on the type of installation and on how your system is configured, there are some extra functionalities:
Grille angles*: Define the angle of the grilles of the zone for cooling and heating modes. It is defined at 90° by default.
Adjust slats*. Define the inclination type of the horizontal and vertical slats on the systems where this function is available.
Control stages*. You can choose among:
- Air: Only uses air stage.
- Radiant: Only uses radiant air.
- Combined: The system combines both stages to reach the perfect comfort quickly and efficiently.
*Note: for safety reasons the zone turns off when changing any of these parameters.
Q-Adapt: Select the control algorithm that best fits your installation. These are the available options:
- Maximum: The system operates at maximum speed, irrespective of the number of zones.
- Power: The speed of the system is higher than in standard mode to increase the flow.
- Standard: Mode by default. The system automatically regulates the speed based on the number of zones.
- Silence: The speed of the system is lower than in standard mode to reduce the noise.
- Minimum: The system operates at minimum speed, irrespective of the number of zones.
. If you deactivate it, the icon will be displayed as
.
ES
EN
FR
IT
PT
DE
27