Recalling The Stored Stations; Delete The Preset Stations; Delete One Station Memory - Brigmton BT- 500 Manual De Instrucciones

MW (AM) from 00 ~24
SW from 00~99
MANUAL STORING STATIONS
Select your desired station, short press the <M/ATS/TIME>
button and notices "E" and "H" switching in the display, either
press the < M+ / M- > button on the right side panel OR rotate
the <Tuning> knob to select your desired stored address.
Press again the <M/ATS/TIME> button to confirm.
NOTE:
If "C" shows after the "E" or "H" in the display, it means you
have previously stored a station into this address. Any new
stored station will replace the existing one.
"H" means the radio is in Memory Mode.
"E" means the radio is in Frequency Mode.
"C" means the memory address is already occupied.
RECALLING THE STORED STATION
On the right side panel, short press the < M+ / M- > button
repeatedly to select your desired stored memory. Or you
can rotate the <Tuning> knob to select your desired station
when "H" is showing in the display.

DELETE THE PRESET STATIONS

DELETE ONE STATION MEMORY

On the right side panel, short press the <M+ / M- > button to
select the stored memory which you want to delete, then
press the <DEL> button to go into delete mode with adress
flashing, press the <DEL> button again to delete the
memory.