Radio Operation; Setting Mw (Am) Tuning Step 9K/10K; Turn On/Off The Unit; Band Selection - Brigmton BT- 500 Manual De Instrucciones

USING TELESCOPIC ANTENNA
1. While listening to the FM and SW station, adjust the length
of the telescopic antenna to get the best reception.
2. While listening to the MW (AM) station, rotate the radio to
find the position which gives the best reception, as the
built-in ferrite bar is located inside the unit and it is strongly
affected by the direction of placing your unit.

RADIO OPERATION

SETTING THE FM RANGE
With radio off, long press the <FM> button until 87 or 64
appears in the display and release the button to select your
desired frequency range.

SETTING MW (AM) TUNING STEP 9K/10K

In power off mode, press & hold the <M+/FOL+/DATE>
button until your desired MW (AM) step (10K or 9K) appears
in the display. Repeat again to change the MW (AM) tuning
step.

TURN ON/OFF THE UNIT

Short press the " " button to turn ON/OFF the unit.

BAND SELECTION

Push the <MODEL> switch upwards to select the radio mode.
Then select your desired band by pressing either the FM /
MW / SW button.