Temperature Sensor; Rs485; Optional Accessories - inti CEDRO+ Serie Manual De Usuario

TEMPERATURE SENSOR

To collect battery temperature data for temperature compensation so the controller can accurately charge the battery. The temperature sensor
is connected via interface 6 (ICC-6048150) and interface 5 (ICC-4024150). If the external temperature sensor is not connected or damaged, the
controller defaults to the internal temperature information.
The controller is shipped with an 80 mm long cable temperature sensor. Should a sensor with a longer cable be required than this needs to be
ordered separately.

RS485

The charger is equipped with a RS485 port with RJ11 sockets, the RJ11 interface is defined as follows:
Protocol applicable to this controller: Modbus Communication Protocol V3.9.
The RS485 interface on this charger is not galvanically isolated and cannot be grounded. Do not
short circuit unused pin (Note NC).

OPTIONAL ACCESSORIES

Bluetooth communication
2 options are available:
1. BT inside.
2. BT external (Cyber-BT), and connected via RJ11 connector.
Bluetooth communication has the following characteristics:
1. Support mobile phone App.
2. Realizes wireless monitoring function of PV charge controller.
3.Use high performance, ultra-low power consumption Bluetooth dedicated chip.
4. Adopt Bluetooth 4.2 and BLE technology.
5. Communication distance up to 10m.
Internet Wireless communication
The controller equipped with Internet wireless communication capability has the
following characteristics:
1. For the wireless Internet of Things communication functionality, the controller can
be remotely accessed through IoT/GPRS.
2. A variety of options are available for remote monitoring and real-time control
through App /PC program.
3. Real-time monitoring of PV voltage, PV charging current, battery voltage, battery
current, load voltage, load current and other system parameters as well as charge
controller status.
4. Real-time automatic fault alarm.
5. Charging and discharging quantities can be counted and displayed by item
grouping and month.
30
MANUAL DE USUARIO CONTROLADOR CEDRO PLUS
This icon in this specification indicates
that this solar controller has Bluetooth
communication function.
Refer to Bluetooth APP instructions for
detailed operation of mobile APP
Please contact our Sales Team for
more details about the IoT wireless
communication.
www.intipv.com