Bitronvideo AN9847/L Manual De Istrucciones página 7

one for each eight users, that are connected in cascade up to AN9847/L
– digitizer module
– AN6009 fl ush mounting boxes and module supports.
• One power supply for AN9847/L digitizer
• One AN1299 power supply for audio door unit
• AV1407/002 door phones, provided with AV1407/102 single-port decoder, designed to adapt the door phone
to €-BUS system.
VIDEO DOOR PHONE SYSTEM
5
5
5
5
5
AN6074/L
AN9847/L
Button
modules +
AN9854/8
A typical €-BUS video door phone system is composed by the following devices:
• An external unit, that is a modular push button panel, composed by:
– one AN6074/L standard video door unit, that takes up the space of 1 module, or one AN6330/L video
colour group
– One AN9847/L digitizer module, that takes up the space of 1 module
– One or several AN6215/L standard button modules, equipped with interface cards for €-BUS AN9854/8,
one for each eight users, that are connected in cascade up to AN9847/L digitizer module
– AN6009 fl ush mounting boxes and module supports.
• One AN1364 power supply for AN9847/L digitizer
• One AV7362 power supply for the video group
• AK7513 video signal splitters
• AV1423/001 standard T-Line or AV1423/002 monitors, provided with AV1423/012 bracket
INSTALLATION
Assembling of the panel
This section explains how to assemble the various modules to implement the panel. The module supports
(AN6017/L for 2 modules, AN6025/L for 3 modules, AN6033/L for 3 modules AN 6041/L for 4 modules) are
delivered with the bottom head (plastic) already assembled.
To implement the panel, only insert the module/s into the corresponding grooves.
12
5
AK7513
5
5
AK7513
5
4
2
2
AN1364 AV7362
If several modules are present, insert the spacer (plastic) (a) included in the module supports.
Complete the preparation of the panel inserting the top head and tightening the head locking screws
(included).
Remember that in the last bottom module (contacting the bottom head) the two forks of the button-
common shall be bent to 90° to avoid any interference.
The panels can be assembled also horizontally. For this application, along with the module supports, also
mating profi les are supplied, to be inserted into the 2 external grooves of the contiguous supports, before
tightening the top heads.
DS90380-007A DS90380-007A
(a)
13