Teltronic RP-30SB VHF Manual Del Usuario página 95

q Close with 5 commanded tones
As in the previous case, the opening codes can be up to 40 but with
the exception that the permission of using or not of any of them is
controlled.
A chart of the microswitches which are employed to define the working
of the repeater and which are located in the control board of the
repeater, is shown in Annex 1. We have to inform that in order to
access to the microswitches it is necessary to open the lower top of the
repeater. Besides, in order to make effective the configuration change,
it is necessary to disconnect and connect again the repeater.
- 35 -
GB