Private Entrance External Videocamera; Camera/Panel Terminals (Rear View); Components; Technical Characteristics - Atec Venice Instrucciones De Montaje

Pag. 8 di 36
s
t
u
v
1.5 VENICE CAMERA/PANEL TERMINALS (REAR VIEW)
CAMERA
A
B
C
D
A - Water seal
B - Monitor connection terminals
C - Power supply terminals ( 5+ / 6- )
D - Terminals for connection to door release or automatic gate opening terminals on gate
control panel
E - Additional six-button panel
F - Additional panel encoding
G - Communications cable input
H - Communication cable output
1.6 COMPONENT RANGE
A - cod.ACV1004 - Venice camera with single button (connects to 7 additional panels)
B - cod.ACV1006 - Venice camera with three buttons (connects to 2 additional panels)
C - cod.ACV1002 - Additional six-button panel
D - cod.ACV1003 - Venice monitor
E - cod.ACV1005 - MIKE camera (connects to Venice monitor for private entrance view)
F - cod.ACV1007 - Power supply 230/16VDC 1A (camera + 1 panel)
E - cod.ACV1008 - Power supply 230/16VDC 2A (camera + more than 1 panel)
w
x
MODULE
H
E
F
G
H
1.7 TECHNICAL CARACTERISTICS
MONITOR Venice
Power supply:
Power Consumption:
Communication System:
CRT monitor dimension:
Conversation Time:
Wiring:
Maximum monitor/camera distance:
Maximum monitor/monitor distance:
Scanning Frequency:
Working Temperature:
Dimensions:
Weight:
TECHNICAL CARACTERISTICS
CAMERA Venice
Power supply:
Power Consumption:
Image Sensor:
Image angle:
Minimum Illumination:
Illumination:
Buttons: 1 or 3 (depends on model)
Maximum call buttons:
Working Temperature:
Dimensions:
Weight:
Power supply for camera and 1 module
Power supply for camera and more than 1 module 14÷16Vdc 2A

2 OPERATION

- If a visitor presses the CALL button of the camera Venice or of one of the additional six-
button panel, a chime sounds and the visitor appears on the monitor screen automatically.
- After viewing the visitor, pick up the handset and talk with him as you use regular
telephone (When you talk with the visitor with holding the handset, the scene of monitor
is off automatically after about 20 seconds)
- When you return the handset on original place after conversation, operation is completed.
In case of permitting the visitor's entrance, press DOOR RELEASE button of monitor, and
the door or the gate will be opened automatically.
WHEN YOU WANT TO USE ONLY IMAGE
1 - Press CAMERA I without lifting the handset.
2 - Public entrance view is displayed for 20 seconds.
1 - Press CAMERA II without lifting the handset.
2 - Private entrance view is displayed for 20 seconds.
WHEN YOU WANT TO USE IMAGE AND SOUND
When you hold up the handset, you can check the outdoor situation.
In case of using the handset, you can also talk with outdoor speaker.

3 INSTALLATION

3.1 -INSTALLATION OF INDOR MONITOR
For use with single-Gang Box (Fig.1) - Mounting on wooden wall surface (Fig.2)
Fig.1
85÷260Vac (with internal supplier)
10W if active - 0,5W on stand-by
Duplex Handset Conversation
4"
Auto-off in 20 seconds
4 wired in polarity (Voice, Picture, Power, GND)
4x0.65mm =50m, coaxial cable 5C-2V=80m
2
4x0.65mm =30m, coaxial cable 5C-2V=50m
2
Horizontal=15,73KHz - Vertical=60Hz
0÷40°C
196x228x50mm
1.130g
14÷16Vdc (supplied by a dc power supplier)
3W if activated
1/3" CCD, 310,000 pixels
Horizontal=71,5° - Vertical=52°
0,1 Lux at about 30 cm in distance
Infrared LED
43 (with single-button camera and 7 panels)
15 (with 3-buttons camera and 2 panels)
-10÷+50°C
99x186x55mm
210g
14÷16Vdc 1A
Fig.2