Operating Instructions; How To Switch The Tool On; If The Saw Chain Or Guide Bar Becomes Jammed; Felling - Famastil F-POWER Manual De Instrucciones

WARNING! If the saw chain (6) does not come to rest immediately then this
indicates that it needs tensioning (see "Fitting the guide bar and chain").

HOW TO SWITCH THE TOOL ON

01
Grip your chainsaw firmly with both hands. Push the lockoff button forward and then
push the on/off switch to start.
02
When the motor starts, remove your thumb from the lock button (2) and grip the handle
firmly (PIC 8).

IF THE SAW CHAIN OR GUIDE BAR BECOMES JAMMED

01
Switch the tool off.
02
Disconnect the tool from the mains supply.
03
Open the cut with wedges to relieve the strain on the guide bar. Do not try to wrench
the chainsaw free. Start a fresh cut.

FELLING

Inexperienced users should not attempt to fell trees. The user may suffer injury or dam-
age to property as a result of failure to control the direction of fall, the tree may splinter or
damaged / dead branches may fall during cutting. The safe distance between a tree to be
felled and bystanders, buildings and other objects is at least 2 1/2 times the height of
the tree. Any bystander, building or object within this distance is at risk from being struck
by the tree when felled. Before attempting to fell a tree:
01
Make sure that there are no local by-laws or regulations that would prohibit or control
the felling of the tree.
02
Consider all conditions that may affect the direction of fall, including:
• The intended direction of fall and the natural lean of the tree.
44
WARNING! Avoid re-starting the tool until you hear
the motor come to a complete rest.

OPERATING INSTRUCTIONS

PIC 8
WARNING! Do not force the tool.
Allow it to do the work. It will do a
better and safer job at the speed
for which it is designed. Excessive
force will stretch the saw chain.