Setting The Movement Parameters; Possible Values For Each Parameter - Kinetec Spectra Essential Manual Del Usuario

Locking the hand control setting
The hand control allows the patient to control the machine as appropriate.
Simultaneously press the
The display reads LOCK, you cannot change the parameters; if you try the message
LOCK appears. To unlock the hand control, simultaneously press the same keys. The display will show
UNLOCK.
We recommend that you lock the hand control when you give it to the patient.
Note: the hand control locking is preserved when you switch the unit ON/OFF.

Setting the movement parameters

Select the parameter to be set:
Extension limit
pause at the extension or flexion limit; the setting to change will flash.
Press the or
To confirm the new setting, press another function button or wait approximately 5 seconds for automatic
confirmation.
Movement parameters can be set either when the machine is stopped or when it is in operation.
Note: pressing the

Possible values for each parameter:

• Extension limit
• Flexion limit
• Speed
• Extension pause
• Flexion pause
Kinetec Spectra Essential™
and keys to lock the hand control,
or flexion limit
buttons to modify the setting; the new setting will flash.
button repeatedly allows you to select pausing at the extension or flexion limit.
1 to 5 (from 45° to 155° per
0 to 900 seconds (15 minutes)
0 to 900 seconds (15 minutes)
or speed
Possible values
-10 to 115°
-5° to 120°
minute)
EN
or
Default setting
30°
70°
2
0
0
6/12