DWT SS03-12 Manual Original página 23

Symbol
1/2"
Meaning
Serial number sticker:
SS ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Size / type of the tool holder�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Symbol
power tool designation
The power tool is intended for tightening and loosing
nuts and bolts�
The area of the tool application can be expanded due
to use of additional accessories�
1 Tool holder
2 Body
3 Ventilation slots
4 On / off switch (reverse function)
5 Additional handle *
6 Allen key *
7 Pin *
8 Socket wrench *
9 Retainer ring (rubber) *
10 Bolt
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation
of power tool elements
Before carrying out any works on the power tool it
must be disconnected from the mains.
Do not draw up the fastening elements
too tight to avoid damaging the thread.
Mounting / dismounting / setting-up of
some elements is the same for all power
tool models, in this case specific models
are not indicated in the illustration.
Installing / removing the additional handle (see
fig. 1-2)
Always use the additional handle 5 when operating�
[SS06-24]
Additional handle 5 may be positioned as deemed
comfortable by the user�
English
23
Meaning
Useful information�
Do not dispose of the power
tool in a domestic waste
container�
DWT
Power tool
components