1. General Safety Information
THIS IS THE SAFETY ALERT SYMBOL. IT ALERTS
YOU TO POTENTIAL PERSONAL HAZARDS. STRICTLY
OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS
SYMBOL.
FAILURE TO COMPLY WITH THE PRECAUTIONS AND
INSTRUCTIONS PROVIDED WITH THIS HEATER, CAN
RESULT IN DEATH, SERIOUS BODILY INJURY AND
PROPERTY LOSS OR DAMAGE FROM HAZARDS OF FIRE,
EXPLOSION, BURN, ASPHYXIATION, CARBON MONOXIDE
POISONING,
AND/OR
ELECTRICAL
PERSONS WHO CAN UNDERSTAND AND FOLLOW THE
INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER.
IF YOU NEED ASSISTANCE OR HEATER INFORMATION
SUCH AS AN INSTRUCTIONS MANUAL, LABELS, ETC.
CONTACT THE MANUFACTURER.
Read instructions carefully. Read and follow all
instructions. Place instructions in a safe place for future
reference. Do not allow anyone who has not read these
instructions to assemble, start or operate the heater.
If the information contained in this manual are not
followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
Unvented portable heaters use air (oxygen) from the
area in which they are used. Adequate combustion and
ventilation air must be provided. Refer to instructions.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
Fire, burn, inhalation, and explosion hazard. Keep
solid combustibles such as building materials, paper or
cardboard, a safe distance away from the heater as
recommended by the instructions. Never use the heater in
spaces which do or may contain volatile or airborne
combustibles, or products such as gasoline, solvents,
paint thinner, dust particles or unknown chemicals.
Not for home or recreational vehicle use
The electrical system to which the appliance is
connected must comply with current legislation.
Some parts of the heater are very hot during and after
operation. Do not touch! Burn danger.
2. Product Description
Diesel or Kerosene, direct-fired mobile/portable space heater
with open combustion chamber.
3. Assembling Instructions
Extract the heater from its carton. If the unit is anyhow
damaged, do not use it and contact your dealer
JAZ 10D/JAZ 20 DH: the heater is fully assembled - no further
operations required
JAZ 20 DW
The following accessories are supplied in the shipping carton.
© Munters 2013
SHOCK.
ONLY
.
Munters reserves the right to make alterations to specifications, quantities, etc. for production or other reasons, subsequent to publication
GB
1
Handle
2
End cap
3
Upper shell
4
Screw M5×8
5
Screw M5×30
6
Washer D.5
7
Nut M5
8
Axle
9
Washer
10
Spacer
11
Wheel
12
Wheel cap
13
Knurled nut
14
Support bracket
To assemble the heater, proceed as follows (see Fig. 1):
Fix end caps (2) to handle (1). Remove upper cover (3)
unscrewing six fixing screws (4). Fix handle to upper shell using
four screws (5), washers (6) and nuts (7). Reassemble upper
shell.
Slide axle (8) through the two tubes on the tank bottom. Slide
spacers (10) on axle. Insert wheels (11), washer (9) and wheel
cap (12). Tap gently on wheel caps to secure them.
Attach support bracket (14) screwing the knurled nut supplied
to the tank drain cap. Finger tighten firmly.
JAZ 30 D/JAZ 40 D
The following accessories are supplied in the shipping carton.
JAZ
Fig. 1
Fig. 2
5
.
1
2
1
6
4
4
4
1
2
2
2
2
1
1